DC 80

Call For Quote

The DC 80 is built to remove concrete, tree roots, involvement in service pipes, rubber rings, all types of deposits and for the reopening of laterals. Produced in stainless steel and can be used in all types of pipes but are primarily used in wastewater pipes and in drinking water pipes. The sharp cutter can be used in conjunction with the DC winch – working radius into the pipe, up to 150 m or to the automatic forwarder. The cutter is to be fixed inside the pipe using the wire winch and/or the brake cylinder which is built into the rear end of the cutter.

KEY FEATURES OF THE DC 80:

Description

The DC 80 is built to remove concrete, tree roots, involvement in service pipes, rubber rings, all types of deposits and for the reopening of laterals. Produced in stainless steel and can be used in all types of pipes but are primarily used in wastewater pipes and in drinking water pipes. The sharp cutter can be used in conjunction with the DC winch – working radius into the pipe, up to 150 m or to the automatic forwarder. The cutter is to be fixed inside the pipe using the wire winch and/or the brake cylinder which is built into the rear end of the cutter.

Working area: 90 – 250 mm/4 – 10 in (Can be upgraded to 300 mm).

The cutter front has a 360° continuous rotation and is standard equipped with an air motor UAG50 to 11.000 rpm. and an air consumption of 1.100 l/min. and an air motor AG100 – 13.000 rpm with an air consumption of 700 l/per minute at 8 bar.

Max moisture content per. m3 supply air: 20 g/m3.

Power 24V.

Comes with 3 sets of wheels of 60, 100 and 130 mm.

Additional information

Working Area (Pipe Diameter):

3.5" – 10" in. / 75 – 150 mm

Supply Hose Length:

150 m / 492 ft.

Outside Diameter:

3.2" in / 80 mm

Cutter Arm/Body Weight:

26 lb / 12 kg

Length:

Without arm: 2 ft / 570 mm
With arm: 2.5 ft / 770 mm

Air Motor:

13000 RPM

Air Requirement:

25 cfm / 700 l/min

Air Pressure:

115 – 145 psi / 8 – 10 bar

Power:

110 / 220 V

Reviews

There are no reviews yet.

Be the first to review “DC 80”

Your email address will not be published. Required fields are marked *