DC 160

Call For Quote

The DC 160 is built to remove concrete, tree roots, involvement in service pipes, rubber rings, all types of deposits and for the reopening of laterals. Produced in stainless steel and can be used in all types of pipes but are primarily used in wastewater pipes and in drinking water pipes. The sharp cutter is pulled backwards and forwards inside the pipe by means of two wire winches that give a working radius into the pipe, of up to 150 m. The cutter is to be fixed inside the pipe using the wire winch and the brake cylinder which is built into the rear end of the cutter.

KEY FEATURES OF THE DC 160:

Description

The DC 160 is built to remove concrete, tree roots, involvement in service pipes, rubber rings, all types of deposits and for the reopening of laterals. Produced in stainless steel and can be used in all types of pipes but are primarily used in wastewater pipes and in drinking water pipes. The sharp cutter is pulled backwards and forwards inside the pipe by means of two wire winches that give a working radius into the pipe, of up to 150 m. The cutter is to be fixed inside the pipe using the wire winch and the brake cylinder which is built into the rear end of the cutter.

The working area is 190 – 700 mm / 7 – 28 in.

The cutter front has a 360° continuous rotation and is standard equipped with an air motor UAG70.

Max moisture content per. m3 supply air: 20 g/m3.

Power 24 V.

Comes with 4 sets of wheel on 80, 130, 160 and 220 mm.

Additional information

Working Area (Pipe Diameter):

7" – 28" in / 190 -700 mm

Supply Hose Length:

492 ft / 150 m

Cutter Diameter:

6.3" in / 160 mm

Cutter Arm/Body Weight:

26 lb / 40 kg

Length:

Without arm: 3ft
With arm: 4ft

Air Motor:

7600 RPM

Air Requirement:

57 cfm / 1600 l/min

Air Pressure:

115 – 145 psi / 8 – 10 bar

Power:

110 / 220 V

Reviews

There are no reviews yet.

Be the first to review “DC 160”

Your email address will not be published. Required fields are marked *